Detailed Information About Hydraulic Press

Hydraulic press equipment is an essential tool in any manufacturing plant. It allows users to perform heavy lifting tasks with a relatively low force. The confined liquid in the ram exerts a high compressive force, allowing you to work on a variety of materials. The equipment comes in different styles and sizes, and is widely used for a variety of tasks. For instance, you may need to repair bent or rusted parts on a piece of equipment, or you may need to compress a material that will eventually break into small pieces.
 
Generally Speaking, There are different types of hydraulic press equipment, and the machines can be classified according to their type of liquid. One type is a water press, and the other uses a power-assisted or microprocessor-controlled system. Both manual and power-assisted models are available for purchase online, and the first two types are highly recommended for many industries. There are also different kinds of presses for different needs. A manual press is simple to operate, while a power-assisted hydraulic model is motorized.

What Is A Hydraulic Press ?

Guangduan's hydraulic press machine is a mechanical device that uses the static pressure of a liquid (defined by Pascal's principle) to shape, deform and configure various types of metals, plastics, rubber and wood. Hydraulic press mechanism consists of main motor, power system and controller.

    

Pascal's principle states that when pressure is applied to a confined liquid, pressure changes occur in the liquid. With hydraulic machines, the pressure in the liquid is applied by a piston which works like a pump to generate a mechanical force.

    

The Working Principle Of Hydarulic Press Machine

The hydraulic press process begins when hydraulic fluid is forced into a double-acting piston. The compressive force inside the smaller hydraulic cylinder pushes the fluid into the larger cylinder, where it applies more force and pressure. The movement of the larger piston forces fluid back into the smaller piston cylinder.

    

Y28 SERIES FOUR-COLUMN DOUBLE ACTION HYDRAULIC PRESS

The passage of fluid between the two pistons creates increased pressure which creates a mechanical force to drive the hydraulic press anvil down onto the workpiece, which deforms to create the desired shape. Once the movement is complete, the pressure is released and the anvil returns to its original position.

    

How Does The Hydraulic Press Work ?

The components of a hydraulic press include two cylinders, two pipes and two pistons. One of the cylinders is the plunger and the other is the plunger; they are connected by a chamber filled with hydraulic oil.

     

RAM

In many hydraulic systems, several pistons are used, the number of which depends on the workload. Multiple small pistons are preferred over a single larger piston for better thrust control. The fluid is supplied to the diver by a pump and a hydraulic accumulator operating between the diver and the pump.

      

The accumulator stores hydraulic pressure as a fluid, releasing it when needed. The configuration of the hydraulic accumulator is a cylinder with a spring-loaded or air-pressure piston. The pump continuously pumps hydraulic oil into the accumulator to keep its pressure constant. The input of the accumulator is connected to the pump and the output is connected to the machine. Without an accumulator, the pump must run continuously. Accumulators prevent this by acting as storage reservoirs for the energy needed to operate the machine.

   

Pump

The three types of hydraulic pumps are vane pumps, gear pumps, and piston pumps, with piston pumps being the most commonly used. Hydraulic machinery pumps are positive displacement pumps, which means that they deliver a constant amount of fluid with each pumping cycle. Positive displacement pumps can be fixed or variable, with fixed pumps operating at a constant speed, while variable pumps change speed and can be reversed.

   

The reason piston pumps are best for hydraulic presses is their ability to work in high pressure hydraulic systems. Due to its low fluid leakage, the pump operates at high volume levels. Types of piston pumps include axial, curved and radial pumps.

   

Cylinder

The number of cylinders in a hydraulic press varies depending on its design. The role of the cylinder is to generate the compressive force which drives the anvil and die. In a two-cylinder design, the cylinder that carries the piston has a larger diameter, while the second cylinder that carries the piston has a smaller diameter. A jack is a metal tube with two ports for the inlet and outlet of hydraulic fluid.

   

The cylinders are connected by pipes containing hydraulic oil. When the piston in the small cylinder applies pressure to the hydraulic fluid in a downward motion, the resulting pressure is applied to the piston. The action in the smaller cylinder by the downward movement of the piston is the action of a mechanical actuator to generate a unidirectional force by a unidirectional stroke.

INQUIRY

CONTACT US

contact-email
contact-logo

Guangdong Metal Forming Machine Works Co., Ltd.

We are always providing our customers with reliable products and considerate services.

If you would like to keep touch with us directly, please go to contact us

  • Home

    Home

  • Tel

    Tel

  • Email

    Email

  • Contact

    Contact

LANGUAGE